82B-1
HORN
Audible warning: Removal - Refitting
82B
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Remove the front bumper (see Front bumper as-
sembly: Exploded view) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
1 - Monotonal horn
a Disconnect the connector (5) .
a Remove:
-the bolt of the monotonal horn (6) ,
-the horn.
2 - Bitonal horn
a
Left-hand side
Right-hand side
a Disconnect the connector of the bitonal horn (7) .
a Remove:
- the bolt of the bitonal horn (8) ,
- the bitonal horn.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Proceed in the reverse order to removal.
Tightening torquesm
horn bolt 21 N.m
145584
Note:
The bitonal horn is composed of two horns,
which are fitted symmetrically on each side of the
vehicle.
145584
145585
To Next Page
Loading...
