Renault Duster 2007 - Page 939

84A-11
CONTROL - SIGNALS
Remote headlight beam adjustment control: Removal - Refitting
84A
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
-the « control - cables - sheaths » assembly from
the vehicle interior,
-the adjustment control,
-the adjustment control bolts.
a Clip on the adjustment knob.
a Clip on the « cables - sheaths » assembly.
a Refit the sealing sleeves.
a Position the cable stop on the right-hand actuator.
a Pull the sheath end piece backwards and clip it onto
the right-hand actuator.
a Position the right-hand actuator sealing sleeve.
a Refit the cable stop on the left-hand actuator.
a Pull the sheath end piece backwards and clip it onto
the left-hand actuator.
a Position the left-hand actuator sealing sleeve.
II - FINAL OPERATION.
a Adjust the headlights (see Halogen headlight: Ad-
justment) .