Schweitzer Engineering Laboratories SEL-421-4 - Page 1036

7.12
SEL-400 Series Relays Instruction Manual Date Code 20171006
Metering
RTD Metering
RTD Metering
Use the MET RTD command to display the RTD values, as shown in Figure 7.7.
Protection Math Variable Metering
Use the MET PMV command to display all 64 PMV values, as shown in Figure 7.8.
=>>MET RTD <Enter>
Relay 1 Date: 04/12/2008 Time: 06:06:31.366
Station A Serial Number: 2008030645
RTD Input Temperature Data (deg. C)
RTD 1 = -50
RTD 2 = 250
RTD 3 = 0
RTD 4 = 45
RTD 5 = 34
RTD 6 = 65
RTD 7 = -23
RTD 8 = 39
RTD 9 = 23
RTD 10 = 11
RTD 11 = 54
RTD 12 = 78
=>>
Figure 7.7 RTD Report
=>>MET PMV <Enter>
Relay 1 Date: 04/07/2008 Time: 21:03:40.451
Station A Serial Number: 2008030645
Protection Analog Quantities
PMV01 = 0.000 PMV02 = 0.000 PMV03 = 0.000
PMV04 = 0.000 PMV05 = 0.000 PMV06 = 0.000
PMV07 = 0.000 PMV08 = 0.000 PMV09 = 0.000
PMV10 = 0.000 PMV11 = 0.000 PMV12 = 0.000
PMV13 = 0.000 PMV14 = 0.000 PMV15 = 0.000
PMV16 = 0.000 PMV17 = 0.000 PMV18 = 0.000
PMV19 = 0.000 PMV20 = 0.000 PMV21 = 0.000
PMV22 = 0.000 PMV23 = 0.000 PMV24 = 0.000
PMV25 = 0.000 PMV26 = 0.000 PMV27 = 0.000
PMV28 = 0.000 PMV29 = 0.000 PMV30 = 0.000
PMV31 = 0.000 PMV32 = 0.000 PMV33 = 0.000
PMV34 = 0.000 PMV35 = 0.000 PMV36 = 0.000
PMV37 = 0.000 PMV38 = 0.000 PMV39 = 0.000
PMV40 = 0.000 PMV41 = 0.000 PMV42 = 0.000
PMV43 = 0.000 PMV44 = 0.000 PMV45 = 0.000
PMV46 = 0.000 PMV47 = 0.000 PMV48 = 0.000
PMV49 = 0.000 PMV50 = 0.000 PMV51 = 0.000
PMV52 = 0.000 PMV53 = 0.000 PMV54 = 0.000
PMV55 = 0.000 PMV56 = 0.000 PMV57 = 0.000
PMV58 = 0.000 PMV59 = 0.000 PMV60 = 0.000
PMV61 = 0.000 PMV62 = 0.000 PMV63 = 0.000
PMV64 = 0.000
=>>
Figure 7.8 PMV Report