9.3
Date Code 20171021 Instruction Manual SEL-421 Relay
ASCII Command Reference
Description of Commands
HELP HELP on page 14.32
HISTORY HISTORY on page 14.32
ID ID on page 14.33
IRIG IRIG on page 14.34
LOOPBACK LOOPBACK on page 14.35
MAC MAC on page 14.36
MAP MAP on page 14.37
METER See METER on page 9.4 in this section.
MET See MET on page 9.4 in this section.
MET AMV MET AMV on page 14.38
MET ANA MET ANA on page 14.38
MET BAT MET BAT on page 14.38 (The SEL-421 provides battery metering for two battery monitor channels.)
MET D MET D on page 14.39
MET E See MET E on page 9.5 in this section.
MET M MET M on page 14.39
MET PM MET PM on page 14.39
MET PMV MET PMV on page 14.40
MET RMS See MET RMS on page 9.5 in this section.
MET RTC MET RTC on page 14.41
MET SYN See MET SYN on page 9.5 in this section.
MET T MET T on page 14.41
OACCESS OACCESS on page 14.41
OPEN n OPEN n on page 14.42 (The SEL-421 supports two circuit breakers, designated 1 and 2.)
PACCESS PACCESS on page 14.42
PASSWORD PASSWORD on page 14.42
PING PING on page 14.43
PORT PORT on page 14.44
PROFILE PROFILE on page 14.45
PULSE PULSE on page 14.45
QUIT QUIT on page 14.46
RTC RTC on page 14.46
SER SER on page 14.46
SET SET on page 14.48 (Table 9.6 lists the class and instance options available in the SEL-421.)
SHOW SHOW on page 14.50 (Table 9 .7 lists the class and instance options available in the SEL-421.)
SNS SNS on page 14.50
STATUS STATUS on page 14.50
SUMMARY SUMMARY on page 14.52
TARGET TARGET on page 14.53
TEC TEC on page 14.54
TEST DB TEST DB on page 14.55
Table 9.1 SEL-421 List of Commands (Sheet 2 of 3)
Command
Location of Command in Section 14: ASCII Command Reference in the SEL-400 Series
Relays Instruction Manual
To Next Page
Loading...
