In face milling, the effective tool diameter for a tool of type "Milling cutter" is stored in a machine
data item.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Selecting the machining direction
Toggle the machining direction in the "Direction" field until the symbol for the required
machining direction appears.
● Same direction of machining
● Alternating direction of machining
Selecting limits
Press the respective softkey for the required limit.
Left
Top
Bottom
Right
The selected limits are shown in the help screen and in the broken-line graphics.
Procedure
1. The part program or ShopTurn program to be processed has been cre‐
ated and you are in the editor.
2. Press the "Milling" softkey.
3. Press the "Face milling" softkey.
The "Face Milling" input window opens.
Programming technology functions (cycles)
10.4 Milling
Turning
486 Operating Manual, 06/2019, A5E44903486B AB
To Next Page
Loading...
Need help?
General
