Simrad ST90 - Page 110

108
442703/B
Requirements
Results
Allmeasurementsaremadeandtheresultsarewrittendown.
Thetopofthetransducerdockisinparallelwiththewaterline.
Thetopmatingsurfaceonthetransducerdockiscleanwithoutsand,dust
oranyotherdestructiveparticles.Isisevenandsmoothwithoutscratches,
dentsorotherphysicaldamage.
ThegasketorO-ringonthetopofthetransducerdockisnotdamaged.
Theinstallationofthegatevalvehasleftenoughspacetoaccessend
switchesand(ifrelevant)hydraulicconnections.
Ifrelevant,thehydraulicsystemhasbeeninstalledasspeciedinthe
relevantdocumentation.
Thehullplatingsurroundingthemountingangeisevenandsmooth
withoutprotrudingobjectsthatcancausenoise.
Allnecessarypreparationshavebeenmadetodesignandinstallsufcient
supportbrackets.
Dateandsignature:
Furtherrequirements
Iftheinspectionrevealserrors,inaccuraciesorunfortunatedispositionsrelatedtounits,
devicesorcables,usetheInstallationremarksformtodocumentthese.Ifnecessary,
writeafullreport,andattachhighresolutionphotos.
Relatedtopics
InstallingtheoptionalgatevalveDN500,page85
Gatevalveinstallationoverview,page86
SimradST90InstallationManual