ST STM32F10 Series User Manual

UM0306 Analog/digital converter (ADC)
479/519
19.13.6 ADC injected channel data offset register x (ADC_JOFRx)(x=1..4)
Address offset: 14-20h
Reset value: 0000 0000h
19.13.7 ADC watchdog high threshold register (ADC_HTR)
Address offset: 24h
Reset value: 0000 0000h
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Reserved
1514131211109876543210
Reserved JOFFSETx[11:0]
rw rw rw rw rw rw rw rw rw rw rw rw
Bits 31:12 Reserved, must be kept cleared.
Bits 11:0
JOFFSETx[11:0]: Data offset for injected channel x
These bits are written by software to define the offset to be subtracted from
the raw converted data when converting injected channels. The conversion
result can be read from in the ADC_JDRx registers.
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Reserved
1514131211109876543210
Reserved HT[11:0]
rw rw rw rw rw rw rw rw rw rw rw rw
Bits 31:12 Reserved, must be kept cleared.
Bits 11:0
HT[11:0] Analog watchdog high threshold
These bits are written by software to define the high threshold for the Analog
Watchdog.
www.BDTIC.com/ST

ST STM32F10 Series Specifications

General

Brand	ST
Model	STM32F10 Series
Category	Microcontrollers
Language	English