Stoll CMS 520 C+ - Page 320

320
5 Setup Data
Setup2 Editor
W+F (tab)
W+F (tab)
W+F (tab) stp
Further information:
 Table Tools [316]
 File tools [317]
 Helpers for Input [311]
 Overview of the Setup2 Editor
of the CMS [
309]
 Setup Data [303]
 Comparing Setup1 to Setup2 [305]
Explanation Value range
W+F… Auxiliary Take-down function W+F1 - W+F50
W+F On Switch on auxiliary take-down.
The auxiliary take-down will be
clos
ed.
The speed of the auxiliary take-
down W+=n is active
Switch off the auxiliary take-down.
The auxiliary take-down will be
opened.
W+= Input of the speed of the auxiliary
take-down
Turning value n (1-15)
Minimum value: 1
Maximum value: 15
Step width: 1
W+P Contact pressure n (0-10), only for
machines with 72 and 84 inch
working width
Minimum value: 0
Maximum value: 10
Step width: 1
W+C Monitoring of auxiliary take-down.
If the auxiliary take-down has not
been used after n (0-100) knitting
rows, the machine will stop. (0 = no
supervision)
Minimum value: 0
Maximum value: 100
Step width: 1
Comment Comment ASCII Characters