Toyota 22R-E User Manual

STD
Limit
STD
Limit
STD
Limit
STD Intake
Exhaust
Limit Intake
Exhaust
Cylinder bore wear Limit
Cylinder block main journal bore
STD
Tensioner head thickness
No. 1 damper wear
No. 2 damper wear
Cylinder head surface warpage
Cylinder bore STD
Piston to cylinder clearance
Ring to ring groove clearance
Journal diameter
Circle runout
Cam height
Connecting
rod
and bearing
Piston pin installing temperature
Tension and
damper
STD
Limit
STD
Limit
Piston and
piston ring
Bearing oil clearance
STD
Limit
STD
Piston ring end gap
Journal oil clearance
Limit
Limit
Limit
Thrust clearance
Thrust clearance
Piston diameter
Cylinder block
Camshaft
Limit
STD
–ENGINE ENGINE MECHANICAL
EG1–78

Toyota 22R-E Specifications

General

Displacement	2.4 L (2366 cc)
Fuel System	Electronic Fuel Injection (EFI)
Compression Ratio	9.0:1
Torque	142 lb⋅ft (193 N⋅m) at 3, 400 rpm
Block Material	Cast Iron
Head Material	Aluminum
Engine Type	Inline-4
Bore x Stroke	92 mm x 89 mm (3.62 in x 3.50 in)
Valvetrain	SOHC, 2 valves per cylinder
Power Output	112 hp (84 kW) at 4, 600 rpm