Toyota 22R-E User Manual

VALVE CLEARANCE INSPECTION AND
ADJUSTMENT
(See step 14 on page MA–11)
IGNITION TIMING INSPECTION AND
ADJUSTMENT
(See step 5 on page IG–10)
TUNE–UP
ENGINE COOLANT INSPECTION
(See steps 1 and 2 on page EG1–225)
IDLE SPEED INSPECTION AND
ADJUSTMENT
(See step 15 on page MA–11)
HIGH–TENSION CORD INSPECTION
(See page IG–6)
ENGINE OIL INSPECTION
(See steps 1 and 2 on page EG1–235)
SPARK PLUGS INSPECTION
(See page IG–8)
AIR FILTER INSPECTION
(See step 4 on page MA–7)
BATTERY INSPECTION
(See CM section)
DRIVE BELTS INSPECTION
(See step 2 on page MA–6)
–ENGINE ENGINE MECHANICAL
EG1–10

Toyota 22R-E Specifications

General

Displacement	2.4 L (2366 cc)
Fuel System	Electronic Fuel Injection (EFI)
Compression Ratio	9.0:1
Torque	142 lb⋅ft (193 N⋅m) at 3, 400 rpm
Block Material	Cast Iron
Head Material	Aluminum
Engine Type	Inline-4
Bore x Stroke	92 mm x 89 mm (3.62 in x 3.50 in)
Valvetrain	SOHC, 2 valves per cylinder
Power Output	112 hp (84 kW) at 4, 600 rpm