31. DISCONNECT WATER BY–PASS PIPE FROM RH
CYLINDER HEAD
Remove the bolt, and disconnect the water by–pass
pipe from the RH cylinder head.
32. REMOVE GENERATOR
35. REMOVE CYLINDER HEAD COVERS
Remove the eleven bolts, engine wire bracket, cylin–
der head cover and gasket. Remove the two cylinder
head covers.
33. REMOVE OIL DIPSTICK GUIDE AND DIPSTICK
(a) Remove the oil dipstick.
(b) Remove the bolt and oil dipstick guide.
30. REMOVE EXHAUST CROSSOVER PIPE
Remove the six nuts, crossover pipe and two gaskets.
34. REMOVE NO.2 ENGINE HANGER FROM LH
CYLINDER HEAD
Remove the two bolts and engine hanger.
–ENGINE ENGINE MECHANICAL
EG2–58
To Next Page
Loading...
