9. CHECK FOR FUEL LEAKAGE
(a) With the ignition switch ON, use SST to connect
terminals FP and +B of the DLC1.
SST 09843–18020
(b) Check for fuel leakage.
(c) Remove SST from the DLC1.
6. CONNECT FOLLOWING CABLES:
(a) (A/T)
Throttle cable
(b) Accelerator cable
(c) (w/ Cruise control)
Actuator cable with bracket
7. REFILL WITH ENGINE COOLANT
8. CONNECT CABLE TO NEGATIVE TERMINAL CF
BATTERY
3. CONNECT FUEL RETURN HOSE
4. CONNECT VACUUM SENSING HOSE
5. CONNECT AIR CLEANER HOSE
–ENGINE MFI SYSTEM
EG2–219
To Next Page
Loading...
