7. REPLACE ENGINE COOLANT
(a) Drain the coolant from the radiator and engine drain
cocks.
(b) Close the drain cocks.
(c) Fill system with coolant.
Coolant capacity (w/ Heater or air conditioner):
22R–E
Ex. 4WD A/T 8.4 liters (8.8 US qts, 7.4 Imp. qts)
4WD A/T 9.1 liters 0.6 US qts, 8.0 Imp. qts)
3VZ–E
2WD M/T 10.4 liters (11.O US qts, 9.2 Imp. qts)
A/T 10.2 liters (10.8 US qts, 9.5 Imp. qts)
4WD M/T 10.5 liters (11.1 US qts, 9.2 Imp. qts)
A/T 10.3 liters (10.9 US qts, 9.1 Imp. qta)
HINT:
Use a good brand of ethylene–glycol base coo–
lant, mixed according to the manufacturer’s in–
structions.
Using coolant which has more than 50% ethyl–
ene–glycol (but not more than 70%) is recom–
mended.
NOTICE:
• Do not use an alcohol type coolant.
• The coolant should be mixed with demineralized
water or distilled water.
22 R – E
w/o Oil filter change
3.8 liters (4.0 US qts, 3.3 Imp. qts)
w/ Oil filter change
4.3 liters (4.5 US qts, 3.8 Imp. qts)
3VZ–E
w/o Oil filter change
2WD 4.0 liters (4.2 US qts, 3.5 Imp. qts)
4WD 4.2 liters (4.4 US qts, 3.7 Imp. qts)
w/ Oil filter change
2WD 4.3 liters (4.5 US qts, 3.8 Imp. qts)
4WD 4.5 liters (4.8 US qts, 4.0 Imp. qts)
–MAINTENANCE MAINTENANCE OPERATIONS
MA–8
To Next Page
Loading...
