Toyota 22R-E - Service Specifications; Service Data

Manifold surface warpage
Limit Intake
Exhaust
Air intake chamber
Free length
Installed load at 40.5 mm (1.594 in.)
Squareness
SERVICE SPECIFICATIONS
SERVICE DATA
STD
O/S 0.05
STD
Limit
Difference between each cylinder
Head surface warpage
Manifold surface warpage
Valve seat Refacing angle
Rocker arm inside diameter
Rocker shaft diameter
Shaft to arm oil clearance
Intake,
exhaust
manifolds and
air intake
chamber
STD Intake
Exhaust
Limit Intake
Exhaust
Intake
Exhaust
Contacting angle
Contacting width
Crankshaft sprocket wear
Camshaft sprocket wear
Stem end refacing
Stem oil clearance
Valve face angle
Stem diameter
Valve head edge thickness
Compression
pressure
Valve guide
bushing
Rocker arm
and shaft
Chain and
sprocket
Valve overall length
Intake
Exhaust
Intake
Exhaust
Intake
Exhaust
Inner diameter
Cylinder head
Valve spring
Limit
STD
Limit
Limit
STD
Limit
Limit
Limit
STD
Limit
Valve
STD
STD
Outer diameter
Replacing temperature (cylinder head side)
STD
Limit
Limit
–ENGINE ENGINE MECHANICAL
EG1–77