Toyota 22R-E - Remove Fuel Pump from Fuel Pump Bracket; Remove Fuel Pump Filter from Fuel Pump; Install Fuel Pump Filter to Fuel Pump; Install Fuel Pump to Fuel Pump Bracket

4. REMOVE FUEL PUMP FROM FUEL PUMP BRACKET
(a) Pull off the lower side of the fuel pump from the pump
bracket.
(b) Disconnect the fuel pump connector.
(c) Disconnect the fuel hose from the fuel pump, and
remove the fuel pump.
(d) Remove the rubber cushion from the fuel pump.
2. INSTALL FUEL PUMP TO FUEL PUMP BRACKET
(a) Install the rubber cushion to the fuel–pump.
(b) Connect the fuel hose to the outlet port of the fuel
pump.
(c) Install the fuel pump connector.
(d) Install the fuel pump by pushing the lower side of the
fuel pump.
FUEL PUMP INSTALLATION
(See Components for Removal and Installation)
1. INSTALL FUEL PUMP FILTER TO FUEL PUMP
Install the pump filter with a new clip.
5. REMOVE FUEL PUMP FILTER FROM FUEL PUMP
(a) Using a small screwdriver, remove the clip.
(b) Pull out the pump filter.
3. REMOVE FUEL PUMP BRACKET
(a) Remove the seven bolts.
(b) Pull out the fuel pump bracket.
–ENGINE MFI SYSTEM
EG2–206