2. INSTALL DRIVE BELT
(See step 3 on page CH–2)
3. CONNECT WIRING TO GENERATOR
(a) Connect the wire to the generator with the nut.
(b) Connect the connector to the generator.
4. CONNECT NEGATIVE CABLE TO BATTERY
5. PERFORM ON–VEHICLE INSPECTION
(See pages CH–2 to 3)
INSTALLATION OF GENERATOR (3VZ–E)
1. INSTALL GENERATOR
Mount the generator on the generator bracket with pivot
bolt and adjusting lock bolts.
Do not tighten the bolts.
–CHARGING SYSTEM Generator
CH–17
To Previous Page
Loading...
