39. INSTALL AIR CLEANER AND HOSE
40. CONNECT CABLE TO NEGATIVE TERMINAL OF
BATTERY
41. FILL WITH ENGINE COOLANT
42. START ENGINE AND CHECK FOR LEAKS
43. PERFORM ENGINE ADJUSTMENT
(See Tune – Up on pages EG2–12 to 27)
44. PERFORM ROAD TEST
Check for abnormal noise, shock, slipage, correct shift
points and smooth operation.
45. RECHECK ENGINE COOLANT LEVEL AND OIL
LEVEL
38. INSTALL RADIATOR
(a) Install the radiator with the four bolts.
(b) Install the No. fan shroud with the four bolts.
(c) Install the No.2 fan shroud with the two clips.
(d) Install the radiator hoses.
(e) (A/T only)
Connect the oil cooler hoses.
(f) Connect the reservoir tank hose.
37. (M/T only)
CONNECT CLUTCH RELEASE CYLINDER HOSE
–ENGINE ENGINE MECHANICAL
EG2–89
To Next Page
Loading...
