28. INSTALL AIR CLEANER AND HOSE
29. INSTALL BATTERY
30. CONNECT CABLE TO NEGATIVE TERMINAL OF
BATTERY
31. FILL WITH ENGINE COOLANT
32. FILL WITH ENGINE OIL
33. START ENGINE AND CHECK FOR LEAKS
34. PERFORM ENGINE ADJUSTMENT
(See Tune – Up on pages EG2–12 to 27)
35. INSTALL ENGINE UNDER COVER
36. INSTALL HOOD
37. PERFORM ROAD TEST
Check for abnormal noise, shock slippage, correct
shift points and smooth operation.
38. RECHECK ENGINE COOLANT AND OIL LEVELS
27. INSTALL RADIATOR
(a) Install the radiator with the four bolts.
(b) Install the No.1 fan shroud with the four bolts.
(c) Install the No.2 fan shroud with the two clips.
(d) Install the radiator hoses.
(e) (A/T)
Connect the oil cooler hoses.
(f) Connect the reservoir tank hose.
25. INSTALL PS PUMP
26. INSTALL PS PUMP PULLEY AND DRIVE BELT
–ENGINE ENGINE MECHANICAL
EG2–133
To Next Page
