Toyota 22R-E - Page 463

(2) Check that there is voltage between ECM terminal BATT and
body ground.
(3) Check wiring between ECM terminal E1 and
body ground.
(1) There is no voltage between ECM terminals BATT and E1.
Check wiring between fuse and
ECM.
Check fuse and fusible link.
Ignition switch 4N
Repair or replace.
Repair or replace.
Try another ECM.
• BATT– El
STD Voltage
No voltage
Terminals
Condition
Replace.
Trouble
BAD
BAD
BAD
No.
–ENGINE MFI SYSTEM
EG2–186