Xerox Phaser 790 Documentation

7. Performing the setup from the Printer Control Panel
Xerox Phaser 790
7–12
14. Use the up and down arrow buttons to scroll through the list of
available print servers. After selecting a server, press Item/Enter.
If the print server login requires a password, the Enter Password
screen displays. Use the up and down arrow buttons to enter
the password. After you enter the password or if a password is
not required, the Print Q Search screen displays.
15. Press Item/Enter if you want the printer to search the entire NDS
tree for the print queue object. Use the up and down arrow
buttons to designate a subtree object. The printer will search for
queues below this object. Press Item/Enter.
If you selected Subtree, the Browse to Print message is
displayed.
16. Press Item/Enter to advance to the NDS browse screens.
Browse to the print queue root and press Item/Enter.
17. Navigate the NDS objects as before. Press Item/Enter to display
objects below the level of the selected object in the second line of
the previous screen.
18. When you see the print queue subtree object in the second line,
press Item/Enter.
19. In the next screen, scroll to display the period in the second line
and press Item/Enter to end the search.
The selected object is displayed.
20. Press Item/Enter to accept the object.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English