Xerox Phaser 790 Documentation

9. Installing user software in a Windows 95/98 environment
Xerox Phaser 790
9–11
9. Select the Show all hardware radio button.
10. From the Manufacturers list, select (Standard port types). From
the Models list, select ECP Printer Port (not Printer Port). Select
Next.
11. Select Finish.
12. When prompted to restart the workstation, select Yes.
After Windows 98 restarts, complete the procedure described in
the section Setting up parallel port printing.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English