Xerox Phaser 790

11. Installing user software in a Windows NT 4.0 environment
Xerox Phaser 790
11–21
10. Perform one of the following:
• If you are installing from the CD, browse to one of the
following folders:
• For PostScript printing:
English\Prntdrvr\PS_drvr\Win_NT4.x folder
• For PCL printing:
English\Prntdrvr\PCL_drvr\Win_NT4.x folder
• If you are installing from files you downloaded using the
Installer WebTool, browse to the Prntdrvr folder.
Select OK and ensure that Oemsetup.inf or Oemsetup is
selected.
The path is copied to the Install from Disk dialog box.
11. Verify the path is correct and select OK.