Xerox Phaser 790 Documentation

16. Introduction to the Command WorkStation
Xerox Phaser 790
16–32
• Printing the Job Log—To print the Job Log, select Print
Pages from the File menu, select Job Log, Print, and OK.
The Job Log is sent to the Print queue and then prints to the
Phaser 790. You can use Job menu commands to
manipulate the Job Log print job as you would any other job.
The printed Job Log contains the jobs for the date range you
specified. Refer to the section Using the Job Log in the
chapter Managing jobs at the Command WorkStation for
more information.
• Printing and clearing the Job Log automatically—You
can decide how you want to handle the Job Log. If you have
Administrator privileges, you can select Setup from the
Server menu and enter your preferences in the Job Log
Setup. You can specify whether to print the Job Log
automatically every 55 jobs, or both print and clear the Job
Log automatically every 55 jobs. You can also select the Job
Log page size.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English