Xerox Phaser 790 Documentation

21. Performing the setup from WebSetup
Xerox Phaser 790
21–16
7. If you have an IPX/SPX frame type, select the Protocol 2 tab.
In the IPX Frames box, perform one of the following:
a. Select the Auto Frames radio button to enable the server to
select the appropriate frame to use with NetWare.
b. Select the Manual Select radio button to add an IPX frame
type. From the Select Frames drop down list, select the
frame type and the Add button. The selected frame type will
be added to list. To remove a frame type, select the frame
type and the Remove button.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English