Xerox Phaser 790 Documentation

21. Performing the setup from WebSetup
Xerox Phaser 790
21–19
9. To specify the Windows Printing Service (SMB) options, select
the Service2 tab from the Network Setup tabs.
Broadcasts from SMB devices cannot be routed beyond their
original network segment without a WINS name server. Setting up
the WINS name server is outside the scope of this
documentation. To find out if a name server is available, contact
your system administrator.
Use all uppercase letters in the following fields.
a. To enable Windows clients to print to the Hold, Print, and
Direct queues, select the Enable Windows Printing
Service check box to enable the options on this tab.
TCP/IP must be configured on the Windows client workstation and the print
server.
b. Type the name (up to 15 characters) that enables you to
access the server on the network in the Server Name text
box.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English