Xerox Phaser 790 - Page 52

1. Setting up the Phaser 790 Printer installation
1-28 Xerox Phaser 790
c. Hold the cartridge by the handle. While keeping the cartridge level,
remove the protective foam wrap.
301036c
d. Holding the cartridge by the handle, align the guide with the Printer
rail.
0301037C-W O L
e. Push the cartridge all the way into the Printer until it snaps into
place.
f. Rotate lever B in the direction of the arrow until the dot is aligned
with the Locked symbol.
301038b
B