Allen-Bradley Kinetix 5100 2198-E1004-ERS - Diagnosis Parameters Via Keypad; Display Fault Record

Rockwell Automation Publication 2198-UM004A-EN-P - October 2019 107
Use the Keypad Interface Chapter 5
The following shows the panel display of positive and negative signs.
Display Fault Record
From the Diagnosis display, use the key to move between high and low byte.
Parameter ID274 (P4.000) FaultRecordN displays the most recent fault. It is not
read-only and can be set to 0 to reset all fault records.
Parameters ID275…ID278 (P4.001 …P4.004) are read-only.
Diagnosis Parameters via Keypad
You can use the keypad to display the status of digital inputs and outputs.
Positive Sign Negative Sign
The second recent error.
The first
recent error.
The third
recent error.
The fourth
recent error.
The fifth
recent error.
S
S
S
S
S