Allen-Bradley Kinetix 5100 2198-E1004-ERS - FFT Display and Show RMS Value

Rockwell Automation Publication 2198-UM004A-EN-P - October 2019 495
Use the Scope Function in KNX5100C Software Appendix E
FFT Display and Show RMS
Value
This option is used to display the frequency spectrum of the waveforms. From the
Condition tab, you can select FFT Display and Show RMS Value.
When you check FFT Display, use the zoom in/zoom out tools or use the mouse
to drag a rectangle area and drop it on the screen to display the frequency
spectrum of the waveforms.
When you check Show RMS Value, the RMS value of each channel is also
displayed.