Allen-Bradley Kinetix 5100 2198-E1004-ERS - Read or Write Via Panel; Set up Capture and Compare in the Software

Rockwell Automation Publication 2198-UM004A-EN-P - October 2019 329
Motion Control Applications Chapter 12
Then, the data is read in sequence.
Figure 150 - Read or Write Via Panel
Set Up Capture and Compare in KNX5100C Software
This user interface lets you use high-speed Capture and Compare functions
quickly and change the data stored in Data Array easily.
Write
P5.011 = 11
P5.013
Not writable via
panel
P5.011 (writing address)
adds 1
P5.011 = 12
Write
P5.012 = 100
Write
P5.012 = 200
Read
P5.012 = 100
Read
P5.012 = 200
P5.011 (writing address)
adds 1P5.011 = 13
Write
P5.012 = 300
Read
P5.013 = 100
P5.011 (reading
address) remains
P5.011 = 11
Write
P5.011 = 12
P5.011 (reading
address) remains
P5.011 = 12
Read
P5.012 = 300
Write
P5.011 = 13
P5.011 (reading
address) adds 1
P5.011 = 12
Read
P5.013 = 200
P5.011 (reading
address) adds 1
P5.011 = 1
Write to data array
Read from data array
Set the address
for writing the
first data
Write 100 to
Data array#11
Write 200 to
Data array#12
Write 300 to
Data array#13
Write
P5.011 = 11
Set the address
for reading the
first data
Read
Data array#11
Read
Data array#12
Read
P5.013 = 300
Read
Data array#13