Rockwell Automation Publication 2198-UM004A-EN-P - October 2019 95
Chapter 5
Use the Keypad Interface
Keypad Input and Panel
Display
The Kinetix® 5100 drive is equipped with a diagnostic status indicator and five
push buttons that are used to display information and to edit a limited set of
parameter values.
The drive has three status indicators: Charge, MOD, and NET. For an
explanation of their functions, see Status Indicators
on page 425. For more
information on how the keypad and status indicator can be used to do tuning, see
Autotuning via the Drive Panel
on page 173.
Figure 66 - Keypad and Display
Topic Page
Keypad Input and Panel Display 95
Drive Displays 96
Edit Settings From the Display 101
Item Key Name Description
1 — Display A 5-digit, 7-segment status indicator that displays the monitoring values,
parameters, and setting values.
2 Mode key Use this key to return to the parent menu or, if there is one, to return to the
previous menu.
3 Up key Use this key to return to the previous menu. It is also increases the values that
you edit while in the configuration and parameter edit screens.
4 Down key Use this key to advance to the next menu. It also decreases the values that you
edit while in the configuration and parameter edit screens.
5 Shift key Use this key to toggle between the digits or menus in the same level.
6 Set key Use this key to enter a sub-menu, if one exists, or to confirm a value that you
have edited.
To Next Page
Loading...
