Rockwell Automation Publication 2198-UM004A-EN-P - October 2019 135
Configure the Drive with KNX5100C Software Chapter 7
Parameter Editor
You can read all Kinetix5100 parameters of the servo drive and upload them to
your personal computer via the Parameter Editor. You can also use it to write all
Kinetix5100 parameters and download them to the servo drive. In addition, you
can display, read, write, and edit the setting values of individual parameters.
The Parameter Editor consists of parameter groups, a toolbar, and a status
indicator that includes the firmware version and other information.
To access the Parameter Editor, select Start > Kinetix 5100 > Setting > Parameter
Editor in the Function List.
To Next Page
Loading...
