Rockwell Automation Publication 2198-UM004A-EN-P - October 2019 119
Configure the Drive with KNX5100C Software Chapter 7
2. In the Search PCDC window, enter Kinetix 5100.
3. Click the appropriate software version and follow prompts to download.
4. Extract the zip file and run Setup.
Launch KNX5100C Configuration Tool
To launch the KNX5100C configuration tool, perform the following steps.
1. Use one of two methods to launch the KNX5100C software:
a. On your personal computer desktop, double-click the KNX5100C
shortcut icon.
b. If you have Connected Components Workbench software installed,
open it and select Tools > KNX5100C.
When the KNX5100C configuration software is launched, it starts with
New Device.
To Next Page
Loading...
