428 Rockwell Automation Publication 2198-UM004A-EN-P - October 2019
Chapter 16 Troubleshoot the Kinetix 5100 Drive System
On the Monitoring Items tab, the monitored items and their setting values
are shown.
On the Select Monitoring Items tab, you can select what items to monitor.
2. Click Save Changes if any changes are made, which are shown
subsequently on the Monitoring Items tab.
IMPORTANT Click Run to run the Monitoring Status function. If you do, the same
button toggles to Stop, which you then click when you want to stop the
monitoring status.
To Next Page
Loading...
