To Next Page

To Previous Page

xStack

DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide

1031

unit - (Optional) Specify which unit on the stacking system. If it is not specified, it refers to the

master unit.

<unit_id> - Enter the unit ID value. This value must be between 1 and 6.

all - (Optional) When all is specified, the firmware image on all units will be updated.

increment - (Optional) This is only required for system which does not have file system and

only support one configuration file since the download of a configuration will automatically

apply the setting to the system. If increment is specified, the existing configuration will not

be cleared before applying to the new configuration. If it is not specified, the existing

configuration will be cleared before applying to the new configuration.

dest_file - (Optional) Used to identify the parameter “path_filename”.

<pathname>- The pathname specifies an absolute pathname on the device file system. If

pathname is not specified, it refers to the boot_up configuration file.

Restrictions

Only Administrator-level users can issue this command.

Example

To download firmware from TFTP:

DGS-3120-24TC:admin# download firmware_fromTFTP 10.54.71.1 src_file px.had

Command: download firmware_fromTFTP 10.54.71.1 src_file px.had

Connecting to server................... Done.

Download firmware...................... Done. Do not power off!

Please wait, programming flash......... Done.

DGS-3120-24TC:admin#

To download configuration from TFTP:

DGS-3120-24TC:admin# download cfg_fromTFTP 10.54.71.1 src_file cfg01.txt

Command: download cfg_fromTFTP 10.54.71.1 src_file cfg01.txt

Connecting to server.................…. Done.

Download configuration................. Done.

DGS-3120-24TC:admin#

109-2 upload

Description

This command is used to upload firmware and configuration from device to TFTP server.

Format

upload [cfg_toTFTP [<ipaddr> | <ipv6addr> | <domain_name 255>] dest_file <path_filename

64> {unit <unit_id>} {src_file <pathname>} {[include | exclude | begin] <filter_string 80>

{<filter_string 80> {<filter_string 80>}} {[include | exclude | begin] <filter_string 80>

{<filter_string 80> {<filter_string 80>}}}}} | log_toTFTP [<ipaddr> | <ipv6addr> |

<domain_name 255>] dest_file <path_filename 64> | attack_log_toTFTP [<ipaddr> |

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)

D-Link xStack DGS-3120 Series User Manual

Other manuals for D-Link xStack DGS-3120 Series