D-Link xStack DGS-3120 Series - Page 1066

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
1061
Parameters
<ipif_name 12> - Enter the name of the IP interface that receives UDP broadcast.
<ipaddr> - Enter the UDP helper server IP address.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add a server address for System interface:
DGS-3120-24TC:admin#config udp_helper add ipif System 20.0.0.90
Command: config udp_helper add ipif System 20.0.0.90
Success.
DGS-3120-24TC:admin#
115-6 config udp_helper delete ipif
Description
This command is used to delete a UDP helper server address for specific interface of the Switch.
Format
config udp_helper delete ipif <ipif_name 12> <ipaddr>
Parameters
<ipif_name 12> - Enter the name of the IP interface that receives UDP broadcast.
<ipaddr> - Enter the UDP helper server IP address.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a server address for System interface:
DGS-3120-24TC:admin#config udp_helper delete ipif System 20.0.0.90
Command: config udp_helper delete ipif System 20.0.0.90
Success.
DGS-3120-24TC:admin#