D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
1062
115-7 show udp_helper
Description
This command is used to display the current UDP Helper configuration on the Switch
Format
show udp_helper {[udp_port | ipif <ipif_name 12>]}
Parameters
udp_port - (Optional) Specify the UDP port configured for the UDP helper.
ipif - (Optional)Specify the name of the IP interface to be configured for the UDP helper
<ipif_name 12> - Enter the name of the IP interface.
Restrictions
None.
Example
To display the current UDP Helper configuration:
DGS-3120-24TC:admin#show udp_helper
Command: show udp_helper
UDP Helper Status : Enabled
Application UDP Port
------------ ---------------
User App1 55
Interface Server
------------ ---------------
System 20.0.0.90
DGS-3120-24TC:admin#

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)