D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
1087
Restrictions
None.
Example
To display the voice VLAN global information when voice VLAN is enabled:
DGS-3120-24TC:admin#show voice_vlan
Command: show voice_vlan
Voice VLAN State : Enabled
VLAN ID : 2
VLAN Name : v2
Priority : 5
Aging Time : 60 minutes
Log State : Enabled
Member Ports : 1:2,1:5
Dynamic Member Ports :
DGS-3120-24TC:admin#
To display the voice VLAN global information when voice VLAN is disabled:
DGS-3120-24TC:admin#show voice_vlan
Command: show voice_vlan
Voice VLAN State : Disabled
Voice VLAN : Unassigned
Priority : 5
Aging Time : 60 minutes
Log State : Enabled
DGS-3120-24TC:admin#
119-9 show voice_vlan oui
Description
This command is used to show OUI information of voice VLAN.
Format
show voice_vlan oui
Parameters
None.

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)