D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
1090
DGS-3120-24TC:admin# show voice_vlan voice_device port 1:1-1:5
Command: show voice_vlan voice_device ports 1:1-1:5
Ports Voice Device Start Time Last Active Time
----- ----------------- ---------------- ----------------
1:1 00-E0-BB-00-00-01 2008-10-6 09:00 2008-10-6 10:30
1:1 00-E0-BB-00-00-02 2008-10-6 14:10 2008-10-6 15:00
1:1 00-E0-BB-00-00-03 2008-10-6 14:20 2008-10-6 15:30
1:2 00-03-6B-00-00-01 2008-10-6 17:15 2008-10-6 18:00
1:4 00-E0-75-00-00-02 2008-10-6 18:15 2008-10-6 20:00
1:5 00-01-E3-01-02-03 2008-10-6 18:30 2008-10-6 20:30
Total Entries: 6
DGS-3120-24TC:admin#
119-12 show voice_vlan lldp_med voice_device
Description
This command is used to show the voice devices being discovered by the LLDP-MED.
Format
show voice_vlan lldp_med voice_device
Parameters
None.
Restrictions
None.
Example
To display the voice devices discovered by LLDP-MED:

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)