D-Link xStack DGS-3120 Series

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
1125
configuration
configuration (Username:
<username> )
Port Security
port security is exceeded
to its maximum learning
size and will not learn any
new address
Port security violation (MAC
address: <macaddr> on port:
<[unitID:]portNum>)
Warning
RADIUS
VID assigned from
RADIUS server after
RADIUS client is
authenticated by RADIUS
server successfully .This
VID will be assigned to the
port and this port will be
the VLAN untagged port
member.
RADIUS server <ipaddr>
assigned VID :<vlanID> to port
<[unitID:]portNum>
(account :<username> )
Informational
Ingress bandwidth
assigned from RADIUS
server after RADIUS client
is authenticated by
RADIUS server
successfully .This Ingress
bandwidth will be
assigned to the port.
RADIUS server <ipaddr>
assigned ingress
bandwith :<ingressBandwidth>
to port <[unitID:]portNum>
(account : <username>)
Informational
Egress bandwidth
assigned from RADIUS
server after RADIUS client
is authenticated by
RADIUS server
successfully .This egress
bandwidth will be
assigned to the port.
RADIUS server <ipaddr>
assigned egress
bandwith :<egressBandwidth> to
port <[unitID:]portNum>
(account: <username>)
Informational
802.1p default priority
assigned from RADIUS
server after RADIUS client
is authenticated by
RADIUS server
successfully. This 802.1p
default priority will be
assigned to the port.
RADIUS server <ipaddr>
assigned 802.1p default
priority:<priority> to port
<[unitID:]portNum> (account :
<username>)
Informational
Failed to assign ACL
profiles/rules from
RADIUS server.
RADIUS server <ipaddr>
assigns <username> ACL failure
at port <[unitID]portNum>
(<string>)
Warning
802.1X
802.1X Authentication
failure.
802.1X Authentication failure [for
<reason> ] from (Username:
<username>, Port:
<[unitID:]portNum>, MAC:
<macaddr> )
Warning
802.1X Authentication
successful.
802.1X Authentication
successful from (Username:
<username>, Port:
<[unitID:]portNum>, MAC:
<macaddr>)
Informational
MAC-based
Access Control
A host fails to pass the
authentication
MAC-based Access Control
unauthenticated host(MAC:
<macaddr>, Port
<[unitID:]portNum>, VID: <vid>)
Critical
The authorized user
number on a port reaches
the max user limit.
Port <[unitID:]portNum> enters
MAC-based Access Control stop
learning state.
Warning per port
The authorized user
number on a port is below
the max user limit in a
time interval.
Port <[unitID:]portNum> recovers
from MAC-based Access Control
stop learning state.
Warning
per port
The authorized user
number on whole device
reaches the max user
limit.
MAC-based Access Control
enters stop learning state.
Warning
per system
The authorized user
number on whole device
is below the max user limit
MAC-based Access Control
recovers from stop learning
state.
Warning
per system