xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
1126
MAC-based Access Control host
login successful (MAC:
<macaddr>, port:
<[unitID]portNum>, VID: <vid>)
MAC-based Access Control host
aged out (MAC: <macaddr>,
port: <[unitID]portNum>, VID:
JWAC
When a client host
authenticated successful.
JWAC authenticated user
(Username: <string>, IP: <ipaddr
| ipv6address>, MAC:
<macaddr>, Port: <[unitID:]
When a client host fails to
JWAC unauthenticated user
(User Name: <string>, IP:
<ipaddr | ipv6address>, MAC:
<macaddr>, Port:
This log will be triggered
when the number of
authorized users reaches
the maximum user limit on
JWAC enters stop learning state. Warning per system
This log will be triggered
when the number of
authorized users is below
the maximum user limit on
whole device in 5 minutes
WAC
When a client host
authenticated successful.
WAC authenticated user
(Username: <string>, IP: <ipaddr
| ipv6address>, MAC:
<macaddr>, Port: <[unitID:]
When a client host fails to
WAC unauthenticated user (User
Name: <string>, IP: <ipaddr |
ipv6address>, MAC: <macaddr>,
Port: <[unitID:]portNum>)
number on whole device
reaches the max user
WAC enters stop learning state.
The authorized user
number on whole device
is below the max user limit
WAC recovers from stop
learning state.
Warning per system
address encountered and
discarded by IP-MAC port
binding
address and discarded by IMPB
(IP: <ipaddr>, MAC: <macaddr>,
Port <[unitID:]portNum>)
Dynamic IMPB entry conflicts
with static ARP(IP: <ipaddr>,
MAC: <macaddr>, Port
Dynamic IMPB entry conflicts
with static FDB(IP: <ipaddr>,
MAC: <macaddr>, Port
conflicts with static IMPB
Dynamic IMPB entry conflicts
with static IMPB(IP: <ipaddr>,
MAC: <macaddr>, Port
Creating IMPB entry failed
due to no ACL rule
available
Creating IMPB entry failed due
to no ACL rule being
available(IP:<ipaddr>, MAC:
<macaddr>, Port
Port shutdown due to the
DHCP rate excludes the
Port < [unitID:] portNum> is
currently shut down due to the
DHCP rate excludes the rate