D-Link xStack DGS-3120 Series

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
1135
2. swFanID
swHighTemperature
High Temperature notification.
Binding
1. swTemperatureUnitIndex
2. swTemperSensorID
3. swTemperatureCurrent
1.3.6.1.4.1.171.12.11.2.2.4.0.1
swHighTemperatureRecover
swHighTemperatureRecover
Binding
1. swTemperatureUnitIndex
2. swTemperSensorID
3. swTemperatureCurrent
1.3.6.1.4.1.171.12.11.2.2.4.0.2
swLowTemperature
Low Temperature notification.
Binding
1. swTemperatureUnitIndex
2. swTemperSensorID
3. swTemperatureCurrent
1.3.6.1.4.1.171.12.11.2.2.4.0.3
swLowTemperatureRecover
Low Temperature notification.
Binding
1. swTemperatureUnitIndex
2. swTemperSensorID
3. swTemperatureCurrent
1.3.6.1.4.1.171.12.11.2.2.4.0.4
agentFirmwareUpgrade
This trap is sent when the process of
upgrading the firmware via SNMP has
finished.
Binding
1. swMultiImageVersion
1.3.6.1.4.1.171.12.1.7.2.0.7
agentCfgOperCompleteTrap
The trap is sent when the configuration is
completely saved, uploaded or downloaded.
Binding
1. unitID
2. agentCfgOperate
3. agentLoginUserName
1.3.6.1.4.1.171.12.1.7.2.0.9
swPowerFailure
Power Failure notification.
Binding
1. swPowerUnitIndex
2. swPowerID
3. swPowerStatus
1.3.6.1.4.1.171.12.11.2.2.2.0.2
swPowerRecover
Power Recover notification.
Binding
1. swPowerUnitIndex
2. swPowerID
3. swPowerStatus
1.3.6.1.4.1.171.12.11.2.2.2.0.3
swUnitInsert
Unit Hot Insert notification.
Binding
1. swUnitMgmtId
2. swUnitMgmtMacAddr
1.3.6.1.4.1.171.12.11.2.2.1.0.1
swUnitRemove
Unit Hot Remove notification.
Binding
1. swUnitMgmtId
2. swUnitMgmtMacAddr
1.3.6.1.4.1.171.12.11.2.2.1.0.2
swUnitFailure
Unit Failure notification.
Binding
1. swUnitMgmtId
1.3.6.1.4.1.171.12.11.2.2.1.0.3
swUnitTPChange
The stacking topology change notification.
Binding
1. swStackTopologyType
2. swUnitMgmtId
3. swUnitMgmtMacAddr
1.3.6.1.4.1.171.12.11.2.2.1.0.4
swUnitRoleChange
The stacking unit role change notification.
Binding
1. swStackRoleChangeType
2. swUnitMgmtId
1.3.6.1.4.1.171.12.11.2.2.1.0.5
lldpRemTablesChange A lldpRemTablesChange notification is sent
when the value of
lldpStatsRemTableLastChangeTime
changes. It can be utilized by an NMS to
1.0.8802.1.1.2.0.0.1