D-Link xStack DGS-3120 Series - Page 227

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
222
Format
config cfm mp_ltr_all [enable | disable]
Parameters
enable - Specify that the MP's reply to the LTR function will be set to all.
disable - Disable sending the all MPs replay LTRs function.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the "all MPs reply LTRs" function:
DGS-3120-24TC:admin# config cfm mp_ltr_all enable
Command: config cfm mp_ltr_all enable
Success.
DGS-3120-24TC:admin#
19-23 show cfm mp_ltr_all
Description
This command is used to show the current configuration of the "all MPs reply LTRs" function.
Format
show cfm mp_ltr_all
Parameters
None.
Restrictions
None.
Example
To show the configuration of the "all MPs reply LTRs" function:
DGS-3120-24TC:admin# show cfm mp_ltr_all
Command: show cfm mp_ltr_all
All MPs reply LTRs: Disabled
DGS-3120-24TC:admin#