D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
240
21-5 disable cpu interface filtering
Description
This command is used to disable CPU interface filtering control.
Format
disable cpu_interface_filtering
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable cpu_interface_filtering:
DGS-3120-24TC:admin# disable cpu_interface_filtering
Command: disable cpu_interface_filtering
Success.
DGS-3120-24TC:admin#
21-6 show cpu access_profile
Description
This command is used to display current access list table.
Format
show cpu access_profile {profile_id <value 1-5>}
Parameters
profile_id - (Optional) Specify the index of access list profile.
<value 1-5> - Enter the profile ID used here. This value must be between 1 and 5.
Restrictions
None.
Example
To display current cpu access list table:

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)