D-Link xStack DGS-3120 Series - Page 264

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
259
Restrictions
Only Administrator-level users can issue this command.
Example
To print out all debug IMPB messages:
DGS-3120-24TC:admin# debug address_binding all state enable
Command: debug address_binding all state enable
Success.
DGS-3120-24TC:admin#
22-21 debug ripng state enable (RI Mode Only)
Description
This command is used to enable the RIPng debug flag.
Format
debug ripng state enable
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enable RIPng debug globally:
DGS-3120-24TC:admin#debug ripng state enable
Command: debug ripng state enable
Success.
DGS-3120-24TC:admin#
22-22 debug ripng state disable (RI Mode Only)
Description
This command is used to disable the RIPng debug flag.
Format
debug ripng state disable