D-Link xStack DGS-3120 Series - Page 265

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
260
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To disable RIPng debug globally:
DGS-3120-24TC:admin#debug ripng state disable
Command: debug ripng state disable
Success.
DGS-3120-24TC:admin#
22-23 debug ripng show flag (RI Mode Only)
Description
This command is used to display the RIPng debug flag setting.
Format
debug ripng show flag
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To show the current RIPng debug flag setting:
DGS-3120-24TC:admin#debug ripng show flag
Command: debug ripng show flag
Current RIPng debug level setting:
DGS-3120-24TC:admin#