D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
281
DGS-3120-24TC:admin#debug vrrp show counter
Command: debug vrrp show counter
VRRP debug statistic counters
Received ADV : 9
Drop : 52
Auth fail : 0
Sent ADV : 0
DGS-3120-24TC:admin#
22-46 debug vrrp show flag (RI Mode Only)
Description
This command is used to display VRRP debug flag settings.
Format
debug vrrp show flag
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display VRRP debug flag settings:
DGS-3120-24TC:admin#debug vrrp show flag
Command: debug vrrp show flag
Global State: Disabled
Current VRRP debug level setting:
virtual router state change
packet receiving
packet sending
mac address update
interface change
timer
DGS-3120-24TC:admin#

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)