D-Link xStack DGS-3120 Series - Page 289

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
284
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To disable the PIM-SSM debug function:
DGS-3120-24TC:admin#no debug pim ssm
Command: no debug pim ssm
Success.
DGS-3120-24TC:admin#
22-51 debug show cpu utilization
Description
This command is used to display the total CPU utilization and CPU utilization per process.
Format
debug show cpu utilization
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
This example shows how to turn on debugging for the show CPU utilization command.