D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
288
DGS-3120-24TC:admin#show dos_prevention
Command: show dos_prevention
Trap:Disabled Log:Disabled Function Version : 1.01
DoS Type State Action Frame Counts
-------------------------- -------- ---------------- ------------
Land Attack Enabled Drop -
Blat Attack Enabled Drop -
TCP Null Scan Disabled Drop -
TCP Xmas Scan Disabled Drop -
TCP SYNFIN Disabled Drop -
TCP SYN SrcPort Less 1024 Disabled Drop -
Ping of Death Attack Disabled Drop -
TCP Tiny Fragment Attack Disabled Drop -
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
23-3 config dos_prevention trap
Description
This command is used to enable or disable the DoS prevention trap state.
Format
config dos_prevention trap [enable | disable]
Parameters
enable - Specify to enable DoS prevention trap state.
disable - Specify to disable DoS prevention trap state.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable DoS prevention trap state:

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)