D-Link xStack DGS-3120 Series - Page 294

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
289
DGS-3120-24TC:admin#config dos_prevention trap disable
Command: config dos_prevention trap disable
Success.
DGS-3120-24TC:admin#
23-4 config dos_prevention log
Description
This command is used to enable or disable the DoS prevention log state.
Format
config dos_prevention log [enable | disable]
Parameters
enable - Specify to enable DoS prevention log state.
disable - Specify to disable DoS prevention log state.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable DoS prevention log state:
DGS-3120-24TC:admin#config dos_prevention log enable
Command: config dos_prevention log enable
Success.
DGS-3120-24TC:admin#