D-Link xStack DGS-3120 Series - Page 339

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
334
Example
To enable DHCP server:
DGS-3120-24TC:admin#enable dhcp_server
Command: enable dhcp_server
Success.
DGS-3120-24TC:admin#
26-24 disable dhcp_server
Description
This command is used to disable the DHCP server function on the switch.
Format
disable dhcp_server
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the Switch’s DHCP server:
DGS-3120-24TC:admin#disable dhcp_server
Command: disable dhcp_server
Success.
DGS-3120-24TC:admin#
26-25 show dhcp_server
Description
This command is used to display the current DHCP server configuration.
Format
show dhcp_server
Parameters
None.